Request a quote
Vendor Name
Description
BR1100A By bioKamino
Type: Bioethanol burner
TECHNOLOGY The Automatic burner is based on 3 main technologies: ° MPI | Multi Point Injections: The microprocessor controls and regulates the flame in various points ° ASC | Automatic Safety Closure: Automatic closure of the burner after use ° AF | Automatic Filling: Automatic bioethanol filling in a quick and safe way thanks to the inner pump ° Control unit with bioKamino Firmware ° INOX / BLACK finish LIGHTING ° Guaranteed lighting at low temperatures ° Fast lighting (Approx. 2 minutes*) ° Automatic lighting cycle with flame stabilization FLAME ° Flame detector ° 3 levels of flame CONSUMPTION ° Low energy consumption (60 W when lighting, afterwards 10 W) SAFETY ° Motion sensor: automatically switches off the burner in case of accidental movement ° Liquid Leakage Sensors ° High Temperature Sensors ° Total Fuel Exhaustion System ° Child lock ° Safety containment tank ° Fast switch off (Approx. 90 seconds) ° User-friendly OPTIONAL ° Optional remote control ° Optional connection to Home Automation System *Test Data relating to ambient temperature of 15°C degrees Capacity: 6 Litres Burning Time: 5 hours Consumption max: 1 Litres/hours Automatic limitation: 5 hours Power: 7 Kw Power supply: 12 V DC, 5 A, 60 W The bioKamino burner is the result of attentive design and practical tests that put user safety in the forefront. Bioethanol does not remain free to move in bioKamino burner tanks but is absorbed by a special ceramic fibre that holds it even in the event of tipping, gradually releasing vapours when operating. The ceramic fibre used is ecologically certified not to release substances harmful to health. The internal labyrinth homogeneously distributes liquid during the filling phase and conveys vapour release from the ceramic fibre to the fire mouth during operations to allow for correct combustion with a lively, warm and clean flame. Each new bioKamino burner model is subject to a strict series of tests before being released and included in the catalogue. The burner that works with ethanol produces a real, hot and exciting fire. It must be installed by a specialist in case of insertion in handcraft structures, in order to avoid problems that can be caused by fire. The burner that works with ethanol can be easily inserted in a traditional fireplace using the specific supports produced by our company. Then you will be able to use your fireplace without any smoke, dirt or ash. It’s not a permanent installation, you can still use your fireplace with wood. The new automatic burners are as complex in design as they are easy to use.